AiM Solo 2 DL GPS + ECU Motorcycle Track Day Lap Timer

Share

£570.00 inc. VAT

£475.00 excl. VAT

seen it cheaper? get a price match
Share

Description

Aim Solo 2 DL with ECU Connection

The Solo 2 DL Version
There is more than 1,000 protocols for over 1,000 ECU’s in the database to allow the Solo 2 DL easy connection to your Engine Control Unit providing you a lot of information with just one cable. Where your ECU protocol is not in the database, an ECU Driver Builder is always available in the Race Studio 3 configuration software which you will be able to create your protocol by yourself.

Coil RPM input
Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).

AiM Solo 2 DL is the most precise GPS lap timer there is with the ability to show you your lap time live as you drive. Receiving data from two satellite constellations from anywhere on the globe by using GPS and Glonass also giving you a significant improvement in data speed and positioning precision.

This all adds up to your startup time being reduced to a matter of seconds and lap times are accurate to a tolerance of two-hundredths of a second.

Easy Connection

The Solo 2 DL is capable of being connected to the vehicles ECU to obtain various data coming from the sensors you have fitted to your vehicle. Solo 2 DL manages all the hardware ECU connections as well as all the communication lines: depending on whether you want to connect to the ECU using the OBDII port, or directly to the ECU through the CAN/RS232 channel. In the unlikely event, your particular ECU protocol is not supported you can connect the Solo 2 DL to a coil RPM which provides a digital input delivered from square wave signals or pulse signals.

The sampled data you record depends on the actual ECU but typically includes RPM, engine load, throttle position (TPS), oil, air, water temperature, oil pressure, battery voltage, speed, gear and lambda value (air/fuel). The list of ECUs is forever growing and being updated.

Add a SmartyCam HD/GP HD camera to create an even more powerful system to help provide you with great videos that include all the technical information to help improve your performance.

Solo 2 DL gives instant speed, timing splits live data and predictive lap times.

The Solo 2 DL has a sharp, high contrast display which helps drivers easily identify the data displayed on the screen. The Solo 2 DL also features a selection of 7 different backlight colours which can be selected to suit your requirements.

Predictive Lap Timer

The GPS technology provides better reliability from the predictive lap timing function so you can see in real-time how your current lap compares to your best lap. The LEDs are also configurable to give a visual indication of whether you are quicker or slower. You can custom build the layout of the display to show the data you want to see.

Data Recall On Screen

Solo 2 DL is not just restricted to circuit racing, it can also be used for point to point or regularity events as well as performance tests such as 0-60mph etc. And just like the circuit racing mode, all the data is recorded and can be reviewed immediately after each race or test session.

Solo 2 DL New Track Creation And Our Track Database

Solo 2 DL allows you to simply create a new temporary or permanent track layout whether it’s a point to point run for rallying or a closed-loop track it can simply be added to the solo 2 and PC database.

Simply put, if there is no track already, the Solo 2 DL will create a new one for you…

With over 4000 tracks pre-loaded from around the world. As soon as it’s switched on the Solo 2 DL identifies its position. Then once you start to drive it automatically recognises the start line coordinates of the track and will start sampling lap times every time you go past.

Included in box:

Solo 2 DL, power cable with AC adapter,
mounting bracket with screws,
user manual,
software installation CD,
Aim sticker.
The cables you can choose are:

  • CAN/K-Line/External power cable with OBDII connector
  • CAN/RS232 external power cable
  • RPM/External power cable (if your vehicle has no ECU)

Note: all cables are available in these four versions: Australian, UK, USA and European adaptor.

Model Fitment

This is a universal product intended for use with many different bikes. Please read the product description for more specific size and fitment information.

Sizing Guide

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

Need a part that isn't listed?

Visit our contact page, and let us know!