HEL Performance Stainless Steel Braided Brake Lines

Made To Order

This product is made to order for your motorcycle and selected brake-line configuration. Because each kit is manufactured specifically to the application and specification selected, processing can take a few additional days during busy periods. Please allow for this when placing your order.

Hose Colour: Please enter your chosen hose colour in the buyer’s note when ordering. Available colours: Transparent / Clear, Carbon Fibre Look, Black, White, Gold, Transparent Red, Red, Orange, Yellow, Green, Transparent Blue, Blue, Transparent Purple and Pink.

Upgrade your Yamaha YZF-R6 2005-2005 braking system with a vehicle-specific HEL Performance stainless steel braided brake line kit. Manufactured using a PTFE inner core, high-strength stainless steel overbraid and stainless steel fittings, HEL lines are designed to provide a firm, consistent braking response and long-term durability.

HEL Part Number: HBF9644
Fitment: Yamaha YZF-R6 2005-2005
Line Configuration: 1 Rear
Routing / Kit Type: Full Length Race

Kit Configuration

Full Length Race routing uses dedicated full-length front hoses from the master cylinder to the front calipers, removing the standard front crossover arrangement where applicable.

Why Choose HEL Braided Brake Lines?

• Improved brake feel – braided construction helps reduce hose expansion under pressure.
• PTFE inner core – designed for excellent chemical and temperature resistance.
• Stainless steel construction – 303/304 stainless overbraid and hose-end fittings.
• Protective PVC outer coating – available in a range of colours.
• Vehicle-specific fitment – manufactured for the application shown.
• HEL Lifetime Warranty.

Hose Colours

Transparent / Clear, Carbon Fibre Look, Black, White, Gold, Transparent Red, Red, Orange, Yellow, Green, Transparent Blue, Blue, Transparent Purple and Pink.

What’s Included?

• HEL stainless steel braided brake hose(s) and fittings
• Copper crush washers where required
• Mounting components where required
• Installation information
• HEL Lifetime Warranty

Technical Specification

• AN3 / -3 hose
• 3mm / 1/8" internal diameter
• PTFE inner core
• 303/304 stainless steel overbraid
• 303/304 stainless steel hose-end fittings
• 4206 PSI / 290 BAR operating pressure
• 12618 PSI / 870 BAR burst pressure

Please Check Your Fitment

Please check the motorcycle model, year and selected line configuration before ordering. Some motorcycles are available with different braking layouts or ABS configurations.

Image Notice: Product images may be representative. The brake line kit supplied will be manufactured for the application and line configuration selected.